1947 - 1954 Nash Model 3148

Many
Many

The 1947-1954 Nash Model 3148 is a tough character, but one you won't often come across. It was among only about 5,000 trucks built by Nash between 1947 and 1954 under its "Haul-Thrift" slogan, and they were mainly for export markets.

However, American Nash dealers could order them for their own use, and most that made it onto U.S. roads ended up as tow trucks.

Advertisement

Handsomely styled inside and out, the 1947-1954 Nash truck is one of the most interesting oddities of the early postwar years. Two types were initially offered: the 133-inch-wheelbase Nash Model 3148 and the 157-inch Nash Model 3248.

Identical otherwise, they weighed 4,810 and 4,887 pounds respectively, with cab. Gross Vehicle Weight was 14,000 pounds, or 15,500 when equipped with a two-speed rear axle and larger tires.

Styling of the 1947-1954 Nash Model 3148 was based on the 1946-1948 Nash car, but not identical: the grille, for example, was simpler and the lower portion did not wrap around the front fenders. Parking lights were round, not rectangular as on the car, and were mounted lower. A less ornate Nash badge decorated the hood.

The interior of the 1947-1954 Nash Model 3148 looked less spartan than most trucks of the day, and the engine-turned metal dash panel was especially handsome.

Power came from the 234.8-cid, overhead-valve Ambassador six, which gave Nash a leg up on most of its competitors, especially overseas. But this was no short-stroke, high compressionengine; it developed only 104 bhp, eight less than the Ambassador car, and churned out 195 lbs/ft oftorqueat 1,700 rpm.

Nash recommended double-clutching the four-speedtransmission. Powertrain options for 1947-1954 Nash Model 3148 included a five-speed and a Timken two-speed Double Reduction Hypoid Vacuum Shift Rear Axle, which gave the truck eight forward speeds.

Standardtireson the 1947-1954 Nash Model 3148 were eight-ply 7.00 x 20s that required 55 pounds of air pressure. Options ranged up to 10-ply 8.25 x 20s.

Timken-Detroit furnished the front and rear axles, Ross the cam and twin lever steering gear, Lockheed the front brakes, and Timken the rears. Leaf springs went at all four corners.

Advertisement

Collectible Pluses of the 1947-1954 Nash Model 3148

  • Rare and desirable
  • 好风格外,内部执行
  • An eye-stopper at any show

Advertisement

Collectible Minuses of the 1947-1954 Nash Model 3148

  • Body parts so rare that most replacements need to be fabricated
  • Very hard to find

For more great articles and pictures on new and classic trucks, see:

Advertisement

Featured

Advertisement

Loading...
Baidu